A printer test page is a sheet built to show printing faults at a glance: solid areas reveal streaks, fine lines and small text show sharpness, color bars show which cartridge is empty, and a ruler shows whether the page was scaled. Print one here in a click. Nothing is uploaded and no printer software is needed.
The four sheets
Black and white test page
A full-width block of solid black, eleven gray steps from 0 to 100%, a smooth gradient, lines from 0.1 to 4 points wide, text from 4 to 16 points, a fine checkerboard and a circle. Use it for laser printers and to check the black cartridge of an inkjet.
Color test page with CMYK bars and gradients
Solid bars of cyan, magenta, yellow and black, the mixed colors they make (red, green, blue, orange, purple, teal), tint ramps of each ink from 10 to 100%, a full spectrum, and two gray strips: one mixed from the color inks, one from black ink alone. In the PDF the bars are pure CMYK, so each bar asks for one ink only.
Alignment and margins test
Frames on the paper edge and 3, 5 and 10 mm inside it, a 100 mm ruler across and another down the side, a grid of 10 mm squares with diagonals, and a center mark. It tells you whether the page was scaled, how much of the edge your printer cannot reach, and whether the paper feeds straight.
Double-sided (duplex) print test
A front and a back page with big arrows and the words TOP EDGE. Print both on one sheet with the settings you plan to use, then hold it up to a window: both arrows should point to the same edge. It is the same sheet the PDF booklet maker offers, because a booklet printed with the wrong flip comes out upside down on every other page.
How to read your test page
| Look at | Good print | If not |
|---|---|---|
| Solid black block | Even and deep, no white lines | White lines across: clogged nozzles or a worn drum |
| Gray steps | All 11 steps look different | Light steps vanish: toner or ink is low; dark steps merge: too much ink |
| Ink bars | Four clean bars in the right colors | A bar missing or wrong: that cartridge is empty, dried or not seated |
| Thin lines and small text | 0.1 pt line and 4 pt text visible | Blurry or doubled: print head needs alignment |
| 100 mm ruler | Measures 100 mm | Shorter: the print dialog scaled the page |
| Edge frames | Inner frames complete | Outer frames cut off: that is your printer’s margin, normal |
Streaks, faded or missing colors: what to do
- Horizontal white lines in inkjet prints. Run the head cleaning cycle from the printer’s menu or its settings app, then print the test again. Two or three cycles often clear a clogged nozzle; more than that wastes ink.
- One color missing or wrong. Check that cartridge is not empty and is clicked into place. A cartridge that has sat unused for months may need several cleanings or a replacement.
- Vertical streaks or smudges on laser prints. Usually the drum or toner cartridge. Gently shake the toner cartridge and wipe the glass of the scanner if the fault also shows on copies.
- Doubled or jagged lines. Run print head alignment from the printer’s maintenance menu.
- Everything slightly too small. The page was printed with Fit to page. Choose Actual size or 100% in the print dialog.
- Squares come out as rectangles or the page is crooked. Straighten the paper stack, push the guides against it and use fresh, flat paper.
How to print the built-in test page in Windows and macOS
Every printer also has its own test page, which shows the driver’s settings and the nozzle pattern. In Windows 11, open Settings, then Bluetooth and devices, Printers and scanners, pick your printer and choose Print test page. In macOS, open System Settings, Printers and Scanners, select the printer, open the print queue and use the Printer menu. Many printers can also print one from their own buttons, without a computer: look for a report or maintenance menu on the printer’s screen.
The built-in page is made for the service technician. The sheets on this page are made to be read by anyone and work with every printer brand the same way.
How it works
The sheets are drawn in your browser as vector graphics, so lines and text are as sharp as your printer can make them. Print sends them to your browser’s print dialog at real size; Download PDF saves the same sheets as a PDF in which the ink bars and tints are defined in CMYK. Nothing is uploaded and the page keeps working offline once loaded.
What people use it for, and when it will not work
Checking a printer that has not been used for weeks, deciding whether to buy a new cartridge, testing a new or second-hand printer, setting up two-sided printing before a booklet, checking that a print shop or office printer does not shrink pages.
- It does not measure color accuracy. Screens and printers show color differently; for exact color you need a calibrated printer profile.
- Photo printers with six or more inks show the extra inks only as part of the mixed colors.
- It cannot fix the printer. It shows what is wrong; cleaning, alignment and cartridges are done from the printer itself.